Nowadays, there are so many products of water cooling stop plugs in the market and you are wondering to choose a best one.You have searched for water cooling stop plugs in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings water cooling stop plugs which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
672 reviews analysed
1. XSPC G1/4" Plug V2, Black Chrome, 4-pack
XSPC plug fitting for water cooling systems with easy tool-free installation.
2. EKWB EK-Plug G1/4" Acetal, Black, 10-Pack
EK-PLUG G1/4 Acetal – Black (10 pack) is a simple pack of ten black acetal G1/4″ plugs with o-rings. The plugs can be easily tightened with a one Euro coin or a similar sized coin. The set of plugs is useful to cap your liquid cooling hardware which you are storing for a longer period of time. The simple acetal plug will prevent dust setting into your liquid cooling gear and since its an airtight plug, it will also prevent oxidation.
This set can also be utilized to convert EK-RES X3 Series reservoirs (also X4), EK-D5 Series pump combo units and EK-DDC Series pump combo units to be compatible with EK Fluid Gaming aluminum parts, by swapping out the brass nickel plated plugs.
Made from black CNC machined acetal. Sealed with quality o-rings.
– Threading: G 1/4″
– Thread length: 4mm
– Diameter: 17mm
– Height: 2.7mm
3. IronBuddy G1/4" Stop Plug Fitting Thread Water Stopper Plug with Coin Slot for Computer Water Cooling System, Sliver, Pack of 4
- ✬The stop fittings is made of brass material, electroplating processing, bright and beautiful appearance.
- ✬Thread Size: G1/4” (International General). OD 13mm, The hand screwing part diameter is18mm.
- ✬Pack of 4: Package included 4 pcs G1/4 stop fitting.
- ✬Each stop fitting contains silicone sealing ring, effectively prevent water from flowing out.
- ✬The stop fitting with coin slot and thread edge design, it is easy to tighten and can be tightened with coins or by hand.
IronBuddy 4 pack G1/4 stop fitting is made of brass material, electroplating processing, bright and beautiful appearance. The water stopper plug prefect for computer water cooling system, they will effectively prevent water from flowing out in water cooling system.
Thread Size: G1/4” (International General).
Package included: 4 Pcs G1/4″ Stop Fitting.
4. Alphacool 17364 Eiszapfen Temperature Sensor Plug G1/4 – Chrome Water Cooling Monitoring
Alphacool Eiszapfen Temperature Sensor A sensor that simply screws into a G1/4” thread. Comes with cable and 2-pin connection. Can be attached to any free G1/4” thread opening on a radiator, reservoir, or t-piece integrated into the loop. Fully sealed and absolutely watertight. Fully galvanized – no corrosion issues! Full functionality with any PC temperature indicator compatible with standard PC temperature indicators! Control your PC independent of the BIOS sensors: that’s a double safeguard, like the familiar “redundancy” (double security) in the professional sector. Long (50cm) connector cable, suitable even for a Big Tower! Scope of Delivery: 1x Alphacool Eiszapfen temperature sensor plug G1/4 – chrome This is a 10 kOhm temperature sensor which is compatible with, among others, the following devices: Aquaero 3.07, aquaero 4.00 Aquastream XT Ultra Aquaduct variants with external sensor input (360 XT, 720 XT) Alphacool Heatmaster Innovatek Fan-O-Matic Lian Li Multipanel Scythe Kaze T-Balancer Sensor input on many motherboards
5. K-Seal ST5501 Multi Purpose One Step Permanent Coolant Leak Repair
- Permanent coolant leak repair – Just shake, pour and go
- Mixes with all antifreeze
- No draining or flushing
- Fixes cracks and leaks in radiator, head gasket, freeze plugs, cylinder heads, heater core, water pump casing and engine blocks
- If product did not seal head gasket leak, the system might be Over-pressurized, which causes back pressure and doesn’t allow the product to reach the problem area, on this page below under Technical Specification is a PDF Guide with instructions to follow to complete the repair successfully
K-Seal 8 fluid ounce bottle is effective to 20 quarts cooling capacity. Just shake, pour and go. It repairs leaks and cracks in radiator, head gasket, heater core, freeze plugs, water pump casing, cylinder heads and engine blocks.
6. Votono 4-Pack G1/4" Plug Water Stop End Cap for PC CPU Cooling Radiator Water Sealing Up Ring (Black)
Product Name: G1/4″ End Cap
Condition: 100% Brand New
Material: Nickel-plated Brass
Fixing Method: Hand Twisted
Surface Treatment: Electroplating
Thread Type: G1/4”
Connector: G1/4″ diameter
Diameter: 18mm/0.71in (Approx.)
Height: 9mm/0.35in (Approx.)
Compatible CPU: Intel / AMD
4x G1/4″ Plug (No retail package)
Water stop plug, water lock plug.
Electroplating processing and durable.
With this design you can use your hand to screw it.
Delicate appearance, mini size.
One of the best fitting for water cooling system.
Metal G1/4″ plug may have few scratching on the surface. But it will not effect on its use.
7. DGZZI G1/4Inch Stop Plug 4PCS G1/4 Thread Silver Plug with Sealing Ring for Computer Water Cool System
- Product Name : Stop Plug.Thread Size: G1/4 Inch.Diameter: 18 mm/0.71Inch.
- Color : Silver.Package Content : 4PCS Stop Plugs.
- Made of brass, electroplated, smooth and beautiful, durable, and long life.
- Each stop fitting includes a silicone seal to prevent water from flowing out.
- Easy to use, line edge design can be tightened with coins.
Product Name : Stop Plug
Material: Brass,Silica Gel
Surface Treatment: Nickel Plating
Thread Size: G1/4 Inch
Diameter: 18 mm/0.71Inch
Color : Silver
Package Content : 4PCS Stop Plugs
Made of brass, electroplated, smooth and beautiful, durable, and long life.
Each stop fitting includes a silicone seal to prevent water from flowing out.
Easy to use, line edge design can be tightened with coins.
By our suggestions above, we hope that you can found Water Cooling Stop Plugs for you.Please don’t forget to share your experience by comment in this post. Thank you!